Cartridge
leader in re-filling, Re-condition & re-manufacturing
Quality & Reliability
Beyond imagination Since 1995
Instructions
for Using Our Re-filled Cartridges.
All
types of Cartridges
Most
of our high capacity cartridges will be primed by the printer when you install
them. However we do recommend following the instructions below to make the
Remove the
cartridge from the cover and protective plastic bag, discarding this packaging
safely, & returning your empty cartridge for recycling. Remove the
protective tape from the cartridge.
Remove the sealing
tape from the head of the cartridge. This sealing tape is removed with your
fingers, do not use any sharp objects near the cartridge head.
Take a single piece
of kitchen paper towel, fold in two and gently dab the cartridge head on the
paper towel until you see a head print from the cartridge as those pictured below.
If you do not get a
good head print from the cartridge, simply wet the corner of the kitchen towel
and gently wipe the cartridge head
several times, then blot the cartridge head again with the dry kitchen towel.
Now insert into your printer.
Frequently Asked Questions ( FAQ ) - Solutions To Common Problems
Q : I have inserted a Re-filled cartridge and
the printer does not accept it:
A : Have you removed the plastic cover from the
face of the cartridge and the blue / black tape from the bottom of the
cartridge before you installed it.
Please remove the cartridge, and then re-insert
it. If the printer still does not accept the cartridge the close the cover on
the printer, and turn it off. Then reboot your pc, and then turn the printer
on, and install the same cartridge again. If
this does not resolve the problem, then install a new cartridge.
Q : The re-filled cartridge works, but the
results are poor:
A : All HP cartridges must be stored upright in their
box whilst in storage before use. If the cartridge has not been stored in this
upright position, then the print quality will be poor until the ink settles to
the bottom of the cartridge where the print head is. Simply leave the cartridge
installed in the printer for 2-6 hours, and quality will be restored. Make sure
any spare cartridges are stored upright, so they work correctly when first
installed.
An air pocket may be stopping the ink from leaving the cartridge. Simply remove
the cartridge, take a folded sheet of kitchen towel, and rap around the
cartridge, and shake the cartridge several times. Then blot the cartridges
print head on the towel until a color or black pattern is seen, now the ink is
leaving the cartridge, the cartridge can be inserted into the printer.
Q : Can HP ink cartridges be recycled:
A : Yes, Please return your empty cartridges in
the plastic envelope provided with your new cartridge.
Q : Do re-filled ink jet / laser jet match the
quality of HPs own brand inks:
A : Now that BLACK JET only use Page bright
premium inks, supplied to us directly, we are confident that our products will
match the original manufacturers in ever way except price.